EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- Waterproofing Chemical
Waterproofing Chemical
Pioneers in the industry, we offer dr. fixit 604 primeseal waterproofing chemical, dr. fixit roofseal ultra waterproofing chemical, fosguard nitobond ep waterproofing chemical 4l, dr. fixit 301 pidicrete urp waterproofing chemical, 20kg dr. fixit 301 pidicrete urp waterproofing chemical and dr fixit 301 pidicrete urp waterproofing chemical from India.
Dr. Fixit 604 Primeseal Waterproofing Chemical
Product Price: Rs 4,300 / LitreGet Best Price
Minimum Order Quantity: 10 Litre
Product Brochure
Product Details:
| Brand | Dr Fixit |
| Usage/Application | Construction |
| Packaging Size | 20 L |
| Category | Waterproofing Coating |
| Coverage | 2140 SFT |
| Purity | 100% |
| Grade Standard | Reagent Grade |
| Shelf Life | 24 months |
| Storage Condition | Store in cool and dry place |
| Water Absorption | 8% |
| Mixed Density | 1.28 g/cc |
| Packaging Type | Bucket |
| Form Of Chemical | Liquid |
| Solid content, % | 48 |
| Bonding strength | Excellent to porous substrates |
| Tensile strength, N/mm2 | 2 |
Dr. Fixit Primeseal is water-based primer composed of acrylic emulsion polymer, properly selected fine fillers, white pigments & additives in water as a medium. It is used as primer over exterior & interior building walls before application of Dr. Fixit Raincoat & other water based paints.
Standard Compliance / Specification
Meets the requirement of ASTM D 1227 – 87, Type III standard. Areas of Application Priming of plastered walls, asbestos, brick, false ceiling, concrete surface, etc.
Features & Benefits
- Bonding - Good binding of chalky or porous substrates and over coating.
- Suitability - Used as a primer on internal and external surfaces.
- Alkali resistant - Based on chemically inert polymers hence suitable for high alkaline substrates.
- Penetration - Provides deep penetration thus imparts excellent substrate adhesion.
- Efflorescence - Provides excellent efflorescence resistance due to its chemical inertness.
1 Surface Preaparation
- Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease, etc.
- Mechanical means such as wire brushing & shot blasting can be used.
- Finally vacuum cleaning of all loose solids and liquids can be done if required.
- All surface cracks up to 5 mm width should be filled up with Dr. Fixit Crack X or Dr. Fixit Unifiller. Cracks more than 5 mm and all separation gaps should be filled up with Dr. Fixit Pidicrete URP or Dr. Fixit Unibond SBR modified mortar or as specified.
- Dilute Dr. Fixit Primeseal with water in proportion of 2:1 and stir well until a uniform consistency is achieved.
- Apply a single coat of diluted Dr. Fixit Primeseal on the cleaned substrate & allow it to dry for 2 to 3 hours before commencing to further finish coats.
- Light cut with sand paper the coating of Dr. Fixit Primeseal before commencing the finish coats on internal walls Precautions & Limitations
- Only 50% dilution is recommended for Dr. Fixit Primeseal by water.
- Excess water on substrate must be removed by suitable means.
- Do not apply during rains or in direct sunlight.
- Do not tint the primer
- Shelf life is 24 months from the date of manufacturing in unopened condition.
- Store in a cool & dry place.
- Keep away from direct sunlight
- Caution should always be exercised while handling of any chemical products.
- Skin Contact: Wash skin with soap & water. Remove contaminated clothes.
- On eye contact: Immediately splash eyes with plenty of water. Consult Physician if irritation persists.
- Ingestion: Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a Physician
Additional Information:
- Delivery Time: with in hours .hyderabad
Get Best QuoteRequest A Callback
Dr. Fixit Roofseal Ultra Waterproofing Chemical
Product Price: Rs 10,490 / 20kgGet Best Price
Minimum Order Quantity: 10 20kg
Product Brochure
Product Details:
| Brand | Dr Fixit |
| Usage/Application | Construction |
| Packaging Size | 20 L |
| Category | Waterproofing Coating |
| Purity | 100% |
| Grade Standard | Reagent Grade |
| Shelf Life | 12 Month |
| Water Absorption | 8% |
| Packaging Type | Bucket |
| Form Of Chemical | Liquid |
Dr. Fixit Heatshield is a heat reducing & ‘Energy Saving’ elastomeric coating composed of acrylic emulsion polymers, microspheres, properly selected & graded inert fillers, light fast & weather durable white pigments, additives & water as medium. It is used as a heat insulating coating on building rooftops & exterior walls because it helps in reducing power consumption substantially by reducing the load on air-conditioners & keeps the interiors cool with additional function of waterproofing.
About the product
Dr. Fixit Heatshield contains advanced material of ‘Hollow Micro spheres based on Borosilicate Glass as micro bubbles’ having remarkable ‘Heat Insulation’ property. The unique spherical shape of the glass bubble produces stable voids which results in low thermal conductivity and a low dielectric constant. When applied on substrate, the hollow micro spheres form a closely packed structure like ‘Air Space’ within the dry film layer that serves as insulation medium to resist heat transfer. Dr. Fixit Heatshield has thus the ability to slow down heat transfer remarkably and keep interiors of externally coated surface of a building cooler by re-radiating most of the solar heat back into the atmosphere.
Specification:
Areas of Application
Terraces and rooftops of buildings - cementitious, asbestos & metal surfaces } Industrial & godown shades with GI or asbestos roofs } Exterior walls of buildings } Cold storages, computer server rooms, electrical control panel rooms, etc } Metal & concrete storage tanks for water, chemicals and fuel in petrochemical industry.
Features & Benefits
- Heat Insulation - Reduces the conductivity of heat from exterior to interior, thus lowers the temperature.
- Solar Reflectance - 83.8% solar reflectance ( ASTM E-903 ), re-radiated heat back to atmosphere
- UV and IR resistant - Resistance to UV & IR emission, protects coating from damage and reduces heat conductivity.
- Microbial resistant – Resistance to algae and fungus growth results into lesser maintenance.
- Non-Toxic water based system - Eco friendly Energy Saving - Reduction in electrical consumption for air-conditioners, saves energy cost.
- Surface Preparation: on Cementitious Surfaces Surface to be applied upon must be free from dust, loose material, paint, oil, or any other material which may impair adhesion Mechanical means such as wire brushing & shot blasting can be used. Finally vacuum cleaning of all loose solids and liquids can be done if required
- All surface cracks up to 5 mm width should be filled up with Dr. Fixit Crack X or Dr. Fixit Unifiller.
- Cracks more than 5 mm and all separation gaps should be filled up with Dr. Fixit Pidicrete URP or Dr. Fixit Unibond SBR modified mortar or as specified.
Get Best QuoteRequest A Callback
FOSguard Nitobond EP Waterproofing Chemical 4L
Product Price: Rs 5,000 / 4LitreGet Best Price
Minimum Order Quantity: 10 4Litre
Product Brochure
Product Details:
| Brand | FOSguard |
| Usage/Application | Construction |
| Packaging Size | 4L |
| Category | Waterproofing Coating |
| Purity | 95% |
| Grade Standard | Reagent Grade |
| Shelf Life | 24 Month |
| Storage Condition | Store in cool and dry place |
| Packaging Type | Bucket |
| Form Of Chemical | Liquid |
Bonding old and new cementitious substrates.
Advantages
- Can be applied on concrete & mortar substrate
- Facilitates improvement in mechanical strength
- Good positive adhesion
- Can be applied between steel and concrete
Nitobond EP Std is a two component epoxy bonding agent supplied in pre-weighed quantities for ready on-site mixing and use.
Mixing
The entire contents of the hardener can should be poured into the resin container and the two materials thoroughly mixed until a uniform colour is obtained. To facilitate application at temperatures below 100C the separate components should be warmed in hot water to a maximum of 25 DegreeC before mixing.
Coating
Mixed Nitobond EP Std should be brush applied to the prepared substrate. The new concrete should be placed within 3 hours at 35 DegreeC to the Nitobond EP Std coated substrate, when it is still in a tacky state.
Cleaning
Tools and equipment shall be cleaned thoroughly after use with Nitofl or Sol.
Coverage
Actual coverage will depend upon the texture and porosity of the substrates being covered. Typically, 1Litre pack will cover about 2.0-2.5 m2 and 4 litre pack around 8.0 - 10.0m2 .
Shelf life
12 months shelf life when stored under normal wear house conditions below 35 DegreeC in unopened containers.
Precautions
Health and Safety
Contact with skin and eyes should be avoided. Gloves shouldbe used when handling these products. If contact with the resin occurs, skin should be washed immediately with strong detergent. A resin removing cream should be used. Eye contamination must be immediately washed with suffi cient quantity of water and medical treatment sought
Get Best QuoteRequest A Callback
Dr. Fixit 301 Pidicrete URP Waterproofing Chemical
Product Price: Rs 1,600 / 5 LitreGet Best Price
Minimum Order Quantity: 10 5 Litre
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 5 Litre |
| Coverage | 2.2 Square Meter For Mix Of 1 kg URP |
| Category | Waterproofing Coating |
| Shelf Life | 12 Months |
| Packaging Type | Bottle |
| Form Of Chemical | Liquid |
| Brand | Dr Fixit |
Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs. Waterproofing of toilets & bathrooms, small terraces etc. It bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance.
Areas of Application
- For concrete repairs - Spalled concrete of floors, columns, beams, chhajas, slabs, parapets, etc.
- For waterproofing – Small roof terraces, sunken portions of toilets & bathrooms, chhajas & lift pits, balconies & staircases. For waterproofing – Liquid & effluent tanks, car decks & walkways.
- As a bonding agent – Bonding mortar for tiles & panels, as undercoat for special finishes such as top rendering coat for chemical resistant floors.
- As a bond coat – For bonding of new concrete to old concrete, masonry stone work, plastering.
- For cladding – Fixing or re-fixing of slip bricks, tiles, stones & marble bedding.
- As external rendering – Weatherproof & frost resistant render, high wear & erosion resistant render. As bonding slurry coat for pinhole treatment on concrete surface & as repair mortar for overhead application.
- Multipurpose – It is multipurpose & economical product, easy to use. £ Cracking – It prevents cracking by improving flexural strength.
- Hardness – Improves the hardness & prevents dust generation. £ Shrinkage – Reduces drying & aging shrinkage cracks. Bonding – Bond strongly to concrete, masonry, stonework, plasters, cementitious surfaces, asphalt & most of the building materials.
- Erosion & corrosion – Improves erosion resistance & prevents corrosio
- Abrasion resistance – Improves abrasion resistance of the cement mix.
- Grouting – Reduces viscosity of cement injection grout for better fluidity & bonding.
Method of Application
1 Surface Preparation
Clean the surface with wire brush or scrubber to remove hidden dirt, loose particles, laitance & dust. Degrease the surface by using suitable solvents.
Repair the spalled concrete portion by saw, cutting the extreme edges of the repair location to a depth of at lease 10 mm to avoid featheredging & to provide strong bond.
Clean the concrete surface to remove any contamination where breaking is not possible. Roughen the surface by light scabbling or grit blasting.
Expose corroded rebar in the repairing area fully . Remove all loose scales & corrosion deposits and immediately clean the surface.
2 Priming
For priming of steel surface, apply Dr. Fixit Rust Remover to all exposed reinforcement area and wash it with water jet before applying Dr. Fixit Epoxy Zinc Rich Primer on the rebars.
For priming of concrete substrate, the surface should be thoroughly saturated with potable water. Remove any excess of water prior to application. Slurry of primer coat is prepared by mixing of one part Dr. Fixit Pidicrete URP, one part of water and 3 parts of fresh OPC cement. Slowly mix cement with binder to obtain a smooth consistency. Continue mixing the slurry during application to prevent settlement.
Additional Information:
- Delivery Time: with in hours in hyderabad
Get Best QuoteRequest A Callback
20kg Dr. Fixit 301 Pidicrete URP Waterproofing Chemical
Product Price: Rs 4,471 / litreGet Best Price
Minimum Order Quantity: 10 litre
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 20kg |
| Type | Bucket |
| Color | White |
| Category | Cementitious Waterproofing |
| Grade Standard | Reagent Grade |
| Purity | 95% |
| Shelf Life | 24 Month |
| Storage Condition | Store in cool and dry place |
| Packaging Type | Bucket |
| Form Of Chemical | Liquid |
| Brand | Dr Fixit |
| Model Number | 301 Pidicrete URP |
- Waterproofs concrete during the construction stage.
- Improves workability.
- Avoids cracking.
- Protect concrete from corrosion.
- LW+ should be used in concrete, plaster and mortar in all the areas of house.
- Mix 200 ml of LW+ with every 50 kg bag of cement.
Description
Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs. Waterproofing of toilets & bathrooms, small terraces etc. It bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance.
Areas of Application
- For concrete repairs - Spalled concrete of floors, columns, beams, chhajas, slabs, parapets, etc.
- For waterproofing – Small roof terraces, sunken portions of toilets & bathrooms, chhajas & lift pits, balconies & staircases. For waterproofing – Liquid & effluent tanks, car decks & walkways
- As a bonding agent – Bonding mortar for tiles & panels, as undercoat for special finishes such as top rendering coat for chemical resistant floors.
- As a bond coat – For bonding of new concrete to old concrete, masonry stone work, plastering.
- For cladding – Fixing or re-fixing of slip bricks, tiles, stones & marble bedding.
- As external rendering – Weatherproof & frost resistant render, high wear & erosion resistant render. As bonding slurry coat for pinhole treatment on concrete surface & as repair mortar for overhead application.
Features & Benefits
- Multipurpose – It is multipurpose & economical product, easy to use.
- Cracking – It prevents cracking by improving flexural strength.
- Hardness – Improves the hardness & prevents dust generation. Shrinkage – Reduces drying & aging shrinkage cracks. Bonding – Bond strongly to concrete, masonry, stonework, plasters, cementitious surfaces, asphalt & most of the building materials.
- Erosion & corrosion – Improves erosion resistance & prevents corrosion.
- Abrasion resistance – Improves abrasion resistance of the cement mix.
- Grouting – Reduces viscosity of cement injection grout for better fluidity & bonding
- Surface Preparation: on Cementitious Surfaces Surface to be applied upon must be free from dust, loose material, paint, oil, or any other material which may impair adhesion Mechanical means such as wire brushing & shot blasting can be used. Finally vacuum cleaning of all loose solids and liquids can be done if required
- All surface cracks up to 5 mm width should be filled up with Dr. Fixit Crack X or Dr. Fixit Unifiller.
- Cracks more than 5 mm and all separation gaps should be filled up with Dr. Fixit Pidicrete URP or Dr. Fixit Unibond SBR modified mortar or as specified.
Get Best QuoteRequest A Callback
Dr Fixit 301 Pidicrete URP Waterproofing Chemical
Product Price: Rs 350 / Bottle Of 1 LitreGet Best Price
Minimum Order Quantity: 6 Bottle Of 1 Litre
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 1 LItre |
| Category | Waterproofing Coating |
| Color | White |
| Purity | 95% |
| Grade Standard | Reagent Grade |
| Shelf Life | 24 Months |
| Form Of Chemical | Liquid |
| Model Number | 301 Pidicrete URP |
- Styrene Butadiene co-polymer latex liquid that improves waterproofing
- Strengthens bonding of new and old concrete & plaster
- Enhances strength & water resistance of repair mix - concrete & mortar
Description
Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs. Waterproofing of toilets & bathrooms, small terraces etc. It bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance.
Areas of Application
- For concrete repairs - Spalled concrete of floors, columns, beams, chhajas, slabs, parapets, etc.
- For waterproofing – Small roof terraces, sunken portions of toilets & bathrooms, chhajas & lift pits, balconies & staircases. For waterproofing – Liquid & effluent tanks, car decks & walkways.
- As a bonding agent – Bonding mortar for tiles & panels, as undercoat for special finishes such as top rendering coat for chemical resistant floors.
- As a bond coat – For bonding of new concrete to old concrete, masonry stone work, plastering. £ For cladding – Fixing or re-fixing of slip bricks, tiles, stones & marble bedding.
- As external rendering – Weatherproof & frost resistant render, high wear & erosion resistant render. As bonding slurry coat for pinhole treatment on concrete surface & as repair mortar for overhead application.
- Multipurpose – It is multipurpose & economical product, easy to use.
- Cracking – It prevents cracking by improving flexural strength.
- Hardness – Improves the hardness & prevents dust generation.
- Shrinkage – Reduces drying & aging shrinkage cracks.
- Bonding – Bond strongly to concrete, masonry, stonework, plasters, cementitious surfaces, asphalt & most of the building materials.
- Erosion & corrosion – Improves erosion resistance & prevents corrosion.
- Abrasion resistance – Improves abrasion resistance of the cement mix.
- Grouting – Reduces viscosity of cement injection grout for better fluidity & bonding.
1 Surface Preparation
- Clean the surface with wire brush or scrubber to remove hidden dirt, loose particles, laitance & dust. Degrease the surface by using suitable solvents.
- Repair the spalled concrete portion by saw, cutting the extreme edges of the repair location to a depth of at lease 10 mm to avoid featheredging & to provide strong bond.
- Clean the concrete surface to remove any contamination where breaking is not possible. Roughen the surface by light scabbling or grit blasting.
- Expose corroded rebar in the repairing area fully . Remove all loose scales & corrosion deposits and immediately clean the surface.
- For priming of steel surface, apply Dr. Fixit Rust Remover to all exposed reinforcement area and wash it with water jet before applying Dr. Fixit Epoxy Zinc Rich Primer on the rebars.
- For priming of concrete substrate, the surface should be thoroughly saturated with potable water. Remove any excess of water prior to application. Slurry of primer coat is prepared by mixing of one part Dr. Fixit Pidicrete URP, one part of water and 3 parts of fresh OPC cement. Slowly mix cement with binder to obtain a smooth consistency. Continue mixing the slurry during application to prevent settlement.
Get Best QuoteRequest A Callback
FOSguard Brushbond Roof Guard Waterproofing Chemical
Product Price: Rs 7,253 / bucketGet Best Price
Minimum Order Quantity: 10 bucket
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 20 Litre |
| Brand | FOSguard |
| Category | Waterproofing Coating |
| Color | grey |
| Grade Standard | Reagent Grade |
| Purity | 95% |
| Shelf Life | 24 Month |
| Storage Condition | Store in cool and dry place |
| Water Absorption | 8% |
| Packaging Type | Bucket |
| Form Of Chemical | Liquid |
Eleastomeric acrylic decorative waterproofing coating fro exterior walls.
Uses
Brushbond Roof Guard is high build fibre reinforced seamless waterproofing render suitable for waterproofing of old & new roofs, it is a polymer base product applied in three OR more coats & each coat with different colours for monitoring correct thickness. The product can be applied directly on existing concrete, brickbat coba, and screed concrete even without removal provided the substrates are sound enough for application of the coating avoiding the risk of damage to the old roof associated while removing of the existing overlays. The product provides a seamless, tough durable water resistant coating which can withstand light pedestrian traffic and also has excellent weather resistance for exterior applications.
Advantages
- High Build system provides higher dry film thickness of more than 1mm in three coats. The product can applied directly on existing sound concrete, brickbat coba, screed concrete even without removal
- No protection screed required eliminating the additional weight due to protection layer Excellent barrier to carbon dioxide, chloride and sulphate ions.
- Allows water vapour to escape from the structure.
- High resistance to the effect of long-term weathering, Durable in all climate conditions including UV attack.
- Excellent bond to concrete and masonry. Good crack accommodation capacity. Minimum surface preparation needed and low labour
All the surfaces which are to receive Brushbond Roof Guard must be free from oil, grease, wax, dirt or any other form of foreign matter which might affect adhesion. Spalled and deeply disintegrated concrete should be removed to sound concrete and repaired with Fosroc Renderoc System.
Mixing
The contents of Brushbond Roof Guard shall be thoroughly stirred for at least 2 minutes using a slow speed (300-400 RPM) drill machine attached with a mixing paddle. Retempering with water should not be done. Keep on stirring during application.
Application
For best results, surfaces should be damp. In order to Obtain the protective properties of Brushbond Roof Guard it is important that the correct rates of application are observed. Use a short stiff brush preferably 120-150mm width and apply the mixed material like paint.
Get Best QuoteRequest A Callback
Dr. Fixit Crack X Shinkfree Waterproofing Chemical
Product Price: Rs 277 / BucketGet Best Price
Minimum Order Quantity: 10 Bucket
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 1 LItre |
| Category | Waterproofing Coating |
| Grade Standard | Reagent Grade |
| Purity | 95% |
| Shelf Life | 24 Month |
| Form Of Chemical | Liquid |
| Brand | Dr Fixit |
| Model Number | Crack X Shrinkfree |
- Fibre reinforced - strong adhesion to surface.
- Better hiding & better wall finish.
- Good water resistance.
- Flexible
- Non-shrink – one time application.
- Bonds strongly to cementitious substrates.
- Better water resistance
Areas of Application
Internal & external surface cracks on plaster upto 10 mm width.
Features & Benefits
- Shrinkage –non-shrink even after curing, prevents from cohesive & adhesive failure on exposure.
- Application – applied as one time filling (does not require second time application, as required in other acrylic sealants).
- User friendly – One pack, very soft paste, easily applicable by fingers or putty knife. Sagging – non-sag nature helps in filling of vertical & overhead cracks.
- Sanding – no sanding is required.
- Staining – Does not migrate any liquid component into concrete surface thus prevents staining.
- Adhesion – excellent adhesion to cementitious surfaces prevents water leakages through the cracks.
- Durability – UV & weather resistance properties increases the life expectancy of the surface.
- Paintability – easily paintable after 5-6 hours of application.
- Surface must be free from dust, oil, grease, and loose particles, etc. moisten the surface before applying Dr. fixit Crack-X Shrinkfree.
- Fine hairline cracks must be widened upto 1 mm minimum and then filled.
- For filling Dr. fixit Crack-X Shrinkfree on the internal surfaces, existing POP or painter’s putty must be removed till plaster surface is exposed.
Application :
- Press Dr. fixit Crack-X Shrinkfree firmly into the crack One time OnlY with a spatula or putty knife and level the surface.
- Handball application can also be used as per the convenience.
- Care must be taken to avoid formation of cavities or bubbles during application.
- Allow it to dry in ambient conditions for 5-6 hrs before painting. for best results 7 days air curing is advised.
- Further POP or painters putty application can be taken up once it is fully dry.
Get Best QuoteRequest A Callback
Fosroc FOSguard Lokfix P
Product Price: Rs 2,010 / kgGet Best Price
Minimum Order Quantity: 10 kg
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 5 kg |
| Type | Bag and Can |
| Color | white |
| Category | Waterproofing Coating |
| Grade Standard | Reagent Grade |
| Packaging Type | HDPE Bag/Can |
| Form Of Chemical | Liquid, Powder |
| Brand | Fosroc |
Additional Information:
- Delivery Time: with in hours in hyderabad
Get Best QuoteRequest A Callback
Dr. Fixit Raincoat Waterproofing Chemical
Product Price: Rs 5,900 / BucketGet Best Price
Minimum Order Quantity: 10 Bucket
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 4 L |
| Brand | Dr Fixit |
| Category | Waterproofing Coating |
| Coverage | 1926 SFT |
| Type | Bucket |
| Color | White |
| Material | Dr.Fixit |
| Grade Standard | Analytical Grade |
| Features | } Resists wind - driven rain, helps prevent water penetration into the substrate. } Anti-carbonation |
| Packaging Type | Bucket |
| Form Of Chemical | Liquid |
Get Best QuoteRequest A Callback
Fosroc Renderoc CS
Product Price: Rs 106 / KgGet Best Price
Minimum Order Quantity: 7 Kg
Product Brochure
Product Details:
| Usage/Application | Renderoc CS is used for sealing cracks on plaster, masonry and concrete substrates. |
| Packaging Size | 1 kg |
| Type | Packet |
| Color | White |
| Material | Fosroc |
| Category | Acrylic Based Polymer Coating |
| Grade Standard | Analytical Grade |
| Form Of Chemical | packet |
Renderoc CS is a crack sealing cementitious material in powder form. It is easy to apply and can be fi nished or smoothened off with a putty blade or a damp sponge. It sets quickly on application and can be over coated with common paints / coatings.
Uses
Renderoc CS is used for sealing cracks on plaster, masonry and concrete substrates.
Advantages
Single component - Easy to use
Versatile - Can be used for plaster, masonry or concrete,can be painted after application
Non sagging - Can be used for horizontal, vertical and overhead applications
Good adhesion - Eff ective bonding with substrate
Non Shrink - Shrinkage cracking eliminated
Mixing
Renderoc CS shall be mixed with water adopting w/p ratio0.36 by weight or a mix porportion of 1 part of water to 2.5 - 3.0 parts of Renderoc CS, by volume. Thorough mixing shall be carried out till a smooth, homogenous paste is obtained.
Application
The mixed paste is fi lled into the groove by gloved hand and the surface fi nished using a putty blade. This is continued till the full length of crack is sealed.
Additional Information:
- Delivery Time: with in hours in hyderabad
Get Best QuoteRequest A Callback
Fosroc Nitocote Ep 405
Product Price: Rs 4,200 / KgGet Best Price
Product Brochure
Product Details:
| Usage/Application | Nitocote EP405 is used for lining and waterproofi ng potable water retaining structures and surfaces |
| Packaging Size | 4 L |
| Coverage | Nitocote EP405 covers 10.0 m 2 per litre per coat at 100 micron thickness. |
| Type | Bucket |
| Color | White |
| Material | Fosroc |
| Category | Acrylic Based Polymer Coating |
| Grade Standard | Analytical Grade |
| Features | Food grade Hygienic Suitability to potable water and food stuff storage. Compatible with all |
| Form Of Chemical | Liquid |
Get Best QuoteRequest A Callback
Dr Fixit Roof Seal Topcoat
Product Price: Rs 5,654 / 20 LitreGet Best Price
Product Brochure
Product Details:
| Usage/Application | Building Roofs / Terraces - Flat & Slope |
| Packaging Size | 20kg |
| Category | Waterproofing Coating |
| Type | Bucket |
| Color | White |
| Coverage | 1926 |
| Material | Dr.Fixit |
| Grade Standard | Analytical Grade |
| Shelf Life | 24 months |
| Form Of Chemical | Liquid |
Get Best QuoteRequest A Callback
Fosroc Brushbond Waterproofing Chemical
Product Price: Rs 2,700 / KgGet Best Price
Minimum Order Quantity: 6 Kg
Product Brochure
Product Details:
| Usage/Application | To protect atmospherically exposed reinforced concrete structures from attack by acid gases, chlorid |
| Packaging Size | 27 |
| Brand | Fosroc |
| Category | Waterproofing Coating |
| Color | grey |
| Material | Fosroc |
| Grade Standard | Analytical Grade |
| Features | Excellent barrier to carbon dioxide, chloride ions and water |
| Form Of Chemical | Powder&liquid |
Brushbond comprises a two component acrylic polymer modified cementitious coating supplied in ready to mix kits. Brushbond can be simply applied by stiff brush, roller, spray or trowel to obtain the desired texture.
Uses
To protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen, water and water vapour and can be used to produce vapour barriers . The product is also recommended to protect other cementitious substrates and masonry for new and existing structures. Typical applications include
Advantages
Excellent barrier to carbon dioxide, chloride ions and water
Allows water vapour to escape from the structure
Water proof - suitable for water retaining structures
High resistance to the effects of long-term weathering, durable in all climatic conditions including UV attack
Minimum surface preparation needed and low labour costs
Flexible, with thermal expansion similar to concrete
Covers honeycombed and pitted poured concrete effectively
Specification
The protective/waterproofing coating shall comprise specially selected cements, graded hardwearing aggregates and additives supplied in powder form together with a liquid component of blended acrylic co-polymers and wetting agents. The total dry film thickness of the coating shall be not less than 2 mm and shall be capable of providing resistance to wear and weather and good chemical resistance to mild inorganic acid solution, diesel oil, gasoline, chlorides, de-icing salts, effluents and organic solvents.
Additional Information:
- Delivery Time: with in hours in hyderabad
Get Best QuoteRequest A Callback
Fosroc Nitoseal PU40
Product Price: Rs 640 / kgGet Best Price
Minimum Order Quantity: 6 kg
Product Brochure
Product Details:
| Usage/Application | Nitoseal PU40 is suitable for sealing joints in concrete, brickwork, blockwork, precast panel joints |
| Packaging Size | ml |
| Type | Pack |
| Color | grey |
| Material | Fosroc |
| Category | Acrylic Based Polymer Coating |
| Grade Standard | Analytical Grade |
| Features | Adhesion to most common building materials,Single component with fast rate of cure, Easy to apply |
| Shelf Life | 12 months |
| Packaging Type | Packet |
| Form Of Chemical | Powder |
| Brand | Fosroc |
Additional Information:
- Delivery Time: with in hours in hydrabad
Get Best QuoteRequest A Callback
Fosroc Renderoc Plug
Product Price: Rs 395 / BagGet Best Price
Minimum Order Quantity: 100 Bag
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 5 kg |
| Type | powder |
| Category | Waterproofing Coating |
| Grade Standard | Reagent Grade |
| Purity | 95% |
| Shelf Life | 12 Month |
| Storage Condition | Store in cool and dry place |
| Water Absorption | 8% |
| Physical State | Powder |
| Packaging Type | Bag |
| Brand | FOSguard |
Get Best QuoteRequest A Callback
WEBERDRY ACR SEAL
Product Price: Rs 4,600 / 20 LGet Best Price
Minimum Order Quantity: 15 20 L
Product Brochure
Product Details:
| Form of Chemical | Liquid |
| Type of Project | Roof |
| Services include | Labour & Material |
| Brand of Product Used | Weber |
| Type Of Construction | Industrial |
| Country of Origin | Made in India |
Additional Information:
- Delivery Time: within hours in hyderabad
Get Best QuoteRequest A Callback
Fosroc Cebex 100
Product Price: Rs 90 / KgGet Best Price
Minimum Order Quantity: 5 Kg
Product Brochure
Product Details:
| Packaging Size | 0.025g |
| Brand | Fosroc |
| Category | Waterproofing Coating |
| Color | White Crystal |
| Form Of Chemical | Powder |
| Country of Origin | Made in India |
Get Best QuoteRequest A Callback
Fosroc Nitoseal PU40 600ML White
Product Price: Rs 600 / PieceGet Best Price
Minimum Order Quantity: 5 Piece
Product Brochure
Product Details:
| Packaging Size | 600ml |
| Brand | Fosroc |
| Application Industry | Weatherproofing |
| Chemical Resistance | Water |
| Is It Eco Friendly | Yes |
| Country of Origin | Made in India |
Get Best QuoteRequest A Callback
W013 - DR. FIXIT PLASTER MASTER 20L
Product Price: Rs 2,300 / 20LitreGet Best Price
Minimum Order Quantity: 10 20Litre
Product Brochure
Product Details:
| Brand | Dr Fixit |
| Usage/Application | Plasting |
| Packaging Size | 20 L |
| Category | Waterproofing Coating |
| Coverage | Cement bag 50kg per 200ml |
| Purity | 100% |
| Country of Origin | Made in India |
Additional Information:
- Production Capacity: 20l
- Delivery Time: with in hours in hyderabad
- Packaging Details: can
Get Best QuoteRequest A Callback
W013 - DR. FIXIT PLASTER MASTER 10L
Product Price: Rs 1,300 / 10LitreGet Best Price
Minimum Order Quantity: 15 10Litre
Product Brochure
Product Details:
| Brand | Dr Fixit |
| Packaging Size | 10kg |
| Coverage | Cement bag 200 ml |
| Purity | 100% |
| Packaging Type | Bucket |
| Country of Origin | Made in India |
Additional Information:
- Delivery Time: with in hours in hyderabad
- Packaging Details: can
Get Best QuoteRequest A Callback
W013 - DR. FIXIT PLASTER MASTER 5L
Product Price: Rs 700 / 5LitreGet Best Price
Minimum Order Quantity: 10 5Litre
Product Brochure
Product Details:
| Brand | Dr Fixit |
| Usage/Application | plasting |
| Packaging Size | 5 L |
| Coverage | 50kg cement bag 200 ml |
| Purity | 100% |
Additional Information:
- Production Capacity: can
- Delivery Time: with in hyderabad
- Packaging Details: can
Get Best QuoteRequest A Callback
W013 - DR. FIXIT PLASTER MASTER 1L
Product Price: Rs 150 / 1LitreGet Best Price
Minimum Order Quantity: 20 1Litre
Product Brochure
Product Details:
| Form of Chemical | Liquid |
| Brand | Dr Fixit |
| Packaging Size | 1 L |
| Coverage | 200ml cement bag 50kg |
| Purity | 100% |
| Country of Origin | Made in India |
Additional Information:
- Delivery Time: with in hours in hyderabad
Get Best QuoteRequest A Callback
2.56Litre FOSguard Nitobond EP Waterproofing Chemical
Product Price: Rs 2,520 / BucketGet Best Price
Minimum Order Quantity: 10 Bucket
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 2.56 Litre |
| Category | Waterproofing Coating |
| Grade Standard | Reagent Grade |
| Purity | 95% |
| Shelf Life | 12 Months |
| Storage Condition | Store in cool and dry place |
| Water Absorption | 8% |
| Packaging Type | Bucket |
| Form Of Chemical | Liquid |
| Brand | FOSguard |
Bonding old and new cementitious substrates.
Advantages
- Can be applied on concrete & mortar substrate
- Facilitates improvement in mechanical strength
- Good positive adhesion
- Can be applied between steel and concrete
Nitobond EP Std is a two component epoxy bonding agent supplied in pre-weighed quantities for ready on-site mixing and use.
Mixing
The entire contents of the hardener can should be poured into the resin container and the two materials thoroughly mixed until a uniform colour is obtained. To facilitate application at temperatures below 100C the separate components should be warmed in hot water to a maximum of 25oC before mixing.
Coating
Mixed Nitobond EP Std should be brush applied to the prepared substrate. The new concrete should be placed within 3 hours at 35oC to the Nitobond EP Std coated substrate, when it is still in a tacky state.
Coverage
Actual coverage will depend upon the texture and porosity of the substrates being covered. Typically, 1Litre pack will cover about 2.0-2.5 m2 and 4 litre pack around 8.0 - 10.0m2 .
Shelf life
12 months shelf life when stored under normal wear house conditions below 35oC in unopened containers.
Health and Safety
Contact with skin and eyes should be avoided. Gloves shouldbe used when handling these products. If contact with the resin occurs, skin should be washed immediately with strong detergent. A resin removing cream should be used. Eye contamination must be immediately washed with suffi cient quantity of water and medical treatment sought.
Get Best QuoteRequest A Callback
Dr Fixit Raincoat Classic Waterproofing Chemical
Product Price: Rs 8,358 / BucketGet Best Price
Minimum Order Quantity: 10 Bucket
Product Brochure
Product Details:
| Brand | Dr Fixit |
| Usage/Application | Construction |
| Packaging Size | 20 L |
| Category | Waterproofing Coating |
| Shelf Life | 36 months |
| Packaging Type | Bucket |
| Form Of Chemical | Liquid |
Dr. Fixit Raincoat Classic system is composed of high quality acrylic emulsion polymer, light fast & weather durable pigments, properly selected & graded fine fillers, additives & biocides. It is used as a waterproofing & protective coating for exterior walls of the buildings because it forms high film thickness. It has excellent flexibility, breathability, water resistance, crack-bridging, weathering durability and an excellent resistance to the growth of micro organisms.
Typical Applications
- All types of exterior masonry surfaces, concrete, cement sand renderings, existing coating etc.
- Applicable on cement sheets. Features Resists wind - driven rain, helps prevent water penetration into the substrate.
- Anti-carbonation - Effective carbon dioxide diffusion barrier protects embedded steel from corrosion
- Waterproofing – Higher film thickness provides crack bridging ability, waterproofing properties
- Flexibility – Flexible and covers hairline cracks(up to 2 mm) effectively, thus prevents ingress of water.
- Toughness – Tough film withstands wind driven rain.
- Elastomeric – High elasticity easily withstands stress caused by thermal expansion & contraction
- Ready to use – No dilution is required Microbial resistance – Resistance to fungus and algae hence maintains the aesthetic value.
- UV resistant – provides excellent color retention for a long lasting attractive finish
- Low dirt pick up – Very low dirt pick up & can be cleaned easily hence maintains the aesthetics.
- Ease of application – User friendly, easily applicable by brush, roller or spray.
1 Surface Preparation
Surface must be thoroughly cleaned, free of dust, grease etc and washed well with water. The surface to be checked for cracks, hollowness and loose plastered areas etc if any. All loose plaster and cracks larger than 10 mm width to be repaired with polymer modified mortar using Dr. Fixit Pidicrete URP. The cracks up to 5 mm to be treated with Dr. Fixit Crack-X Paste and the larger ones up to 10 mm with Dr. Fixit Crack-X Shrinkfree.
2 Priming
After the proper surface preparation and curing of repaired areas wash the surface well and maintaining it in saturated surface dry condition proceed for priming using Dr. Fixit Primeseal diluted in 2:1 ratio with water (2 parts Primeseal diluted with 1 part water). Maintain the spreading rate of 8-10 sq mtr per litre for a single coat application to achieve about 20 – 25 microns DFT. Allow it to dry for 6-8 hrs.
3 Coating
Brush apply one coats of Dr. Fixit Raincoat Universal Base Coat without any dilution Maintain the spreading rate of 3.5 -4.0 sq mtr per litre / coat application to achieve about 120-130 microns DFT. The second coat of Dr. Fixit Raincoat Classic Top Coat to be apply with interval of 6-8 hours without any dilution. Maintain the spreading rate of 7-8 sq mtr per litre / coat application to achieve about 50-60 microns DFT.
Additional Information:
- Delivery Time: with in hours in hyderabad
Get Best QuoteRequest A Callback
FOSguard Conplast Wl Xtra Waterproofing Chemical
Product Price: Rs 591 / KgGet Best Price
Minimum Order Quantity: 10 Kg
Product Brochure
Product Details:
| Brand | FOSguard |
| Usage/Application | Construction |
| Packaging Size | 5 Litre |
| Category | Cementitious Waterproofing |
| Purity | 95% |
| Grade Standard | Reagent Grade |
| Shelf Life | 24 Month |
| Packaging Type | Bottle |
| Form Of Chemical | Liquid |
Integral waterproofing admixture with advanced technology
Benefits :
- Advanced technology
- Corrosion resistence
- High strength
- Cohesive Mix
- Durability
To minimise permeability and increase the waterproofi ng properties of concrete, plaster and cement sand mortars for critical applications like roof slabs,screeds, basements, external plastering, bathroom fl oors, water tanks, sumps, drains etc.
Feature and Benefit:
Advanced Technology :
New generation molecule yields high performance concrete. Suitable for any grade of concrete including higher grades.
Corrosion resistant:
Meets the requirements of Japanese code JIS Z1535 (modifi ed) fi rst of kinds in the integral water proofi ng range.
High Strength : Due to better dispersion of cement particles and helps in the better degree of hydration yielding high strength compared to control.
Cohesive Mix : Improves workablity and cohesiveness of the concrete.
Durability : Improves durability due to reduction in permeability of concrete and corrosion resistance of steel.
Description
Conplast WL Xtra is a dark brown liquid based on cement dispersion polymers which mixes readily with water and therefore disperses evenly. Conplast WL Xtra waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more effi cient compared to traditional powder and conventional integral waterproofi ng compounds as its use results in two fold improvement of concrete or mortar.
Technical support
Fosroc provides a technical advisory service for onsite assistance and advice on admixture selection, evaluation trials and dispensing equipment. Technical data and guidance can be provided for admixtures and other products for use with fresh and hardened concrete.
Application Instructions
- Add cement & aggregates to concrete mixer as per the mix design, mix in dry state for 1 minutes.
- Start addition of 75–80% mixing water & mix for 2-3 minutes.
- Fosroc Conplast WL Xtra is added as per the recom- mended dosage into the remaining mixing / gauging water, then add to concrete mixer & mix for another 2 minutes.
- Place the concrete or apply plaster, as needed.
- Cure the applied mortar or concrete as per good construction practices or use Fosroc Concure curing compounds.
9877851641 9876668482
Get Best QuoteRequest A Callback
Fosroc Nitocote Wall Guard
Product Price: Rs 6,800 / 20kgGet Best Price
Minimum Order Quantity: 10 20kg
Product Brochure
Product Details:
| Packaging Size | 20kg |
| Usage/Application | Construction |
| Size | 20 L |
| Brand | Fosroc |
| Features | Waterproof |
| Packaging Type | Bucket |
Eleastomeric acrylic decorative waterproofing coating fro exterior walls
Uses
- Provides a high quality effective waterproofing cum decorative coating for exterior wall.
- Prevents dampness of external wall subjected to severe weather in coastal environment.
- Ideally suitable for coating on all type of external masonry surfaces, concrete, cement sand renderings etc.
Advantages
- High build film - Higher film thickness provides tough waterproof membrane ensuring no ingress of water with- -standing wind driven rain.
- Highly flexible - Accommodates movement in the structure covers hairline cracks(upto 0.5 mm).
- Elongation - Easily accomodates movement of thermal expansion & contraction.100% elongation at 110-120 micron DFT crack bridging in excess of 0.5mm.
- Ready to use – Dilution is not required.
- UV stability – Resistance to UV rays.
- Anti dirt – low dirt pick up & can be cleaned easily.
- Breathability – Allow internal moisture to escape.
- Ease of application – User friendly product, easily applicable by brush, roller or spray
Nitocote Wall Guard is water based polymer coating composed of high quality acrylic polymer, with weather resistant pigments, properly selected & graded fine fillers. It is used as a waterproofing & decorative coating for protection of exterior walls of the buildings from heavy wind driven rain.
Surface Preparation
All surface should be dry and free from contamination such as oil, grease, loose particles, decayed matter, moss, algae growth, laitance, and all traces of mould release oils and curing compounds. Where moss, algae or similar growths have occurred, treatment with a proprietary biocide should be carried out.
Mixing
The contents of Nitocote Wall Guard shall be thoroughly stirred for atleast 2 minutes using a slow speed (300 - 400 RPM) drill machine attached with a mixing paddle.
Application
Apply Nitocote Wall Guard with a nylon brush, or a felt roller, to the prepared substrate. Allow Nitocote Wall Guard first coat to dry for 5-6 hours at 30 0C and then apply the second coat. In order to obtain the waterproof properties of the Nitocote Wall Guard, it is important that the correct rates of application and over coating time are observed. Nitocote Wall Guard shall be applied at theoretical application rate 3 to 3.5 m / litres for 2 coats. Application should not commence if the temperature of the substrate is below 10 oC.
Limitations
Minimum ambient surface and material temperature must be between 10 to 40 0C. For applications outside this range, contact Fosroc for advise. Application of the product should be always on dry substrates.
Shelf life
Nitocote Wall Guard has a shelf life of 12 months when stored under normal warehouse conditions in unopened containers. Exposure to moisture greatly reduces the shelf life
Additional Information:
- Delivery Time: with in hours in hyderabad
- Packaging Details: can
Get Best QuoteRequest A Callback
20Litre FOSguard Conplast Wl Xtra Chemical
Product Price: Rs 1,950 / kgGet Best Price
Minimum Order Quantity: 10 kg
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 20 Litre |
| Coverage | 200 ml per 50 Kg Cement Bag |
| Category | Waterproofing Admixture |
| Grade Standard | Reagent Grade |
| Purity | 95% |
| Shelf Life | 24 Month |
| Storage Condition | Store in cool and dry place |
| Packaging Type | Bucket |
| Form Of Chemical | Liquid |
| Brand | FOSguard |
- Advanced technology
- Corrosion resistence
- High strength
- Cohesive Mix
- Durability
To minimise permeability and increase the waterproofi ng properties of concrete, plaster and cement sand mortars for critical applications like roof slabs,screeds, basements, external plastering, bathroom fl oors, water tanks, sumps, drains etc.
Feature and Benefit:
Advanced Technology :
New generation molecule yields high performance concrete. Suitable for any grade of concrete including higher grades.
Corrosion resistant:
Meets the requirements of Japanese code JIS Z1535 (modifi ed) fi rst of kinds in the integral water proofi ng range.
High Strength : Due to better dispersion of cement particles and helps in the better degree of hydration yielding high strength compared to control.
Cohesive Mix : Improves workablity and cohesiveness of the concrete.
Durability : Improves durability due to reduction in permeability of concrete and corrosion resistance of steel.
Description
Conplast WL Xtra is a dark brown liquid based on cement dispersion polymers which mixes readily with water and therefore disperses evenly. Conplast WL Xtra waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more effi cient compared to traditional powder and conventional integral waterproofi ng compounds as its use results in two fold improvement of concrete or mortar.
Technical support
Fosroc provides a technical advisory service for onsite assistance and advice on admixture selection, evaluation trials and dispensing equipment. Technical data and guidance can be provided for admixtures and other products for use with fresh and hardened concrete.
Application Instructions
- Add cement & aggregates to concrete mixer as per the mix design, mix in dry state for 1 minutes.
- Start addition of 75–80% mixing water & mix for 2-3 minutes.
- Fosroc Conplast WL Xtra is added as per the recom- mended dosage into the remaining mixing / gauging water, then add to concrete mixer & mix for another 2 minutes.
- Place the concrete or apply plaster, as needed.
- Cure the applied mortar or concrete as per good construction practices or use Fosroc Concure curing compounds.
Get Best QuoteRequest A Callback
FOSguard Conplast WL Xtra Chemical
Product Price: Rs 160 / BottleGet Best Price
Minimum Order Quantity: 10 Bottle
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 1 LItre |
| Color | White |
| Category | Waterproofing Admixture |
| Grade Standard | Reagent Grade |
| Purity | 95% |
| Shelf Life | 12 months |
| Storage Condition | Store in cool and dry place |
| Water Absorption | 8% |
| Packaging Type | Bottle |
| Form Of Chemical | Liquid |
| Brand | FOSguard |
Integral waterproofing admixture with advanced technology
Benefits :
- Advanced technology
- Corrosion resistence
- High strength
- Cohesive Mix
- Durability
To minimise permeability and increase the waterproofi ng properties of concrete, plaster and cement sand mortars for critical applications like roof slabs,screeds, basements, external plastering, bathroom fl oors, water tanks, sumps, drains etc.
Feature and Benefit:
Advanced Technology :
New generation molecule yields high performance concrete. Suitable for any grade of concrete including higher grades.
Corrosion resistant:
Meets the requirements of Japanese code JIS Z1535 (modifi ed) fi rst of kinds in the integral water proofi ng range.
High Strength : Due to better dispersion of cement particles and helps in the better degree of hydration yielding high strength compared to control.
Cohesive Mix : Improves workablity and cohesiveness of the concrete.
Durability : Improves durability due to reduction in permeability of concrete and corrosion resistance of steel.
Description
Conplast WL Xtra is a dark brown liquid based on cement dispersion polymers which mixes readily with water and therefore disperses evenly. Conplast WL Xtra waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more effi cient compared to traditional powder and conventional integral waterproofi ng compounds as its use results in two fold improvement of concrete or mortar.
Technical support
Fosroc provides a technical advisory service for onsite assistance and advice on admixture selection, evaluation trials and dispensing equipment. Technical data and guidance can be provided for admixtures and other products for use with fresh and hardened concrete.
Application Instructions
- Add cement & aggregates to concrete mixer as per the mix design, mix in dry state for 1 minutes.
- Start addition of 75–80% mixing water & mix for 2-3 minutes.
- Fosroc Conplast WL Xtra is added as per the recom- mended dosage into the remaining mixing / gauging water, then add to concrete mixer & mix for another 2 minutes.
- Place the concrete or apply plaster, as needed.
- Cure the applied mortar or concrete as per good construction practices or use Fosroc Concure curing compounds.
Get Best QuoteRequest A Callback
WEBER SBR LITX
Product Price: Rs 4,400 / LitreGet Best Price
Minimum Order Quantity: 6 Litre
Product Brochure
Product Details:
| Brand | Weber |
| Packaging Size | 20 L |
| Type | Can |
| Color | white |
| Packaging Type | can |
| Form Of Chemical | Liquid |
Additional Information:
- Delivery Time: within hours in hyderabad
Get Best QuoteRequest A Callback
ZYDEX Zycoprime Plus Waterproofing Chemical
Product Price: Rs 300 / 1LitreGet Best Price
Minimum Order Quantity: 1 1Litre
Product Brochure
Product Details:
| Form of Chemical | Liquid |
| Brand | Zydex |
| Usage/Application | Waterproofing |
| Packaging Size | 1 L |
| Purity | 99.99% |
| Packaging Type | Bottle |
| Country of Origin | Made in India |
Get Best QuoteRequest A Callback
Elephant Shield Liquid Rubber
Product Price: Rs 1,200 / 1LitreGet Best Price
Minimum Order Quantity: 5 1Litre
Product Brochure
Product Details:
| Color | White |
| Form | Paste |
| Packaging Type | Bucket |
| Packaging Size | 1L |
| Coverage | 9 to 12 Sq Ft / Ltr |
| Country of Origin | Made in India |
Get Best QuoteRequest A Callback
Fosroc Decofill 1kg
Product Price: Rs 350 / KgGet Best Price
Minimum Order Quantity: 5 Kg
Product Brochure
Product Details:
| Packaging Size | 1 kg |
| Brand | Fosroc |
| Category | Waterproofing Coating |
| Form Of Chemical | paste |
| Country of Origin | Made in India |
Get Best QuoteRequest A Callback
La Greens La Bond SBR Latex 5 kg
Product Price: Rs 1,170 / LitreGet Best Price
Minimum Order Quantity: 5 Litre
Product Brochure
Product Details:
| Brand | MYK |
| Packaging Size | 5kg |
| Category | Waterproofing Coating |
| Color | white |
| Form Of Chemical | Liquid |
| Country of Origin | Made in India |
Get Best QuoteRequest A Callback
Dr. Fixit Roofseal Classic Acrylate PU Chemical
Product Price: Rs 5,895 / BucketGet Best Price
Minimum Order Quantity: 10 Bucket
Product Brochure
Product Details:
| Brand | Dr Fixit |
| Usage/Application | Construction |
| Packaging Size | 20 Litre |
| Category | Waterproofing Coating |
| Color | White |
| Purity | 100% |
| Shelf Life | 24 Month |
| Water Absorption | 8% |
| Packaging Type | Bucket |
| Form Of Chemical | Liquid |
Dr. Fixit Roofseal is a single component cold applied elastomeric waterproofing coating based on synthetic resin emulsion. It is a tough yet extremely flexible coating that can be efficiently applied to any thickness by roller or squeegee creating a fully adhered waterproofing coating with no wastage. It is water based with low VOC’s that is sustainable for years as a waterproofing coating.
Areas of Application
- Waterproofing of flat concrete roofs
- As an external protective coating for block works before fixing Aluminum Composite Panels
- Waterproofing - High film build up provides excellent water resistance
- Elastomeric - Excellent flexibility and elongation properties - can easily accommodate all normal building movements.
- Seamless - Can be applied to complex shapes to form a seamless and highly durable water proofing coating.
- Adhesion - Adheres firmly to most of building surfaces including concrete, brick etc. both horizontal and vertical surfaces.
- Water based – Easy cleaning of tools and brushes by water.
- Easy to apply - Suitable consistency for easy application by brush, roller or squeegee
Surface Preparation
- Surface preparation is generally limited to cleaning by broom brush or compressed air. All surfaces to be applied must be free from dust, loose material, oil, or any other material which may impair adhesion of the material. All surface cracks up to 5 mm wide should be filled up with the same material and pre-striped prior to application of the material. All joints of vertical up stand should have 50 x 50 mm angle fillets prepared with sand -cement mortar; mixed with Dr. Fixit Pidicrete URP.
- Primer is required only for high absorbent surface such as light weight concrete. Primer recommended to be used is Dr. Fixit Torchshield Primer, when the surface is completely dry
- Apply a coat of Dr. Fixit Roofseal over an angle fillet as a reinforcing strip all around the parapet wall and allow drying. Apply on all vertical up stand at an average girth of 200 mm. Apply 2 coats Dr. Fixit Roofseal at 0.75 ltrs / m2/ coat, at an interval of 12 hrs between the coats and allow drying completely.
- After full drying of second coat for at least 72 hrs, a water ponding test can be performed by filling water on the terrace by carefully blocking all the down take drain outlets without damaging the coating. The test shall be carried out for 48 hrs by filling water up to 50 mm level. Observe for leakages if any and then remove the water and allow the coating to dry completely for about 24 hrs before proceeding further.
- Spread 100 grm/m2 geotextile over, before a concrete screed is laid. Protect the coating with a concrete screed in M 20 grade. The protective screed should be of minimum 50 mm thickness maintaining an average slope of 1:100 towards the drain outlets for effective and efficient draining of water. After the application of screed, provide control joints along the length and breadth of entire screed area. The joint can be provided by using a saw cutting machine attached with a 3 mm blade. The joints will be 12 mm wide and 12 mm deep. 28-30 days later, these joints can be filled with a suitable elastomeric sealant.
Get Best QuoteRequest A Callback
Fosroc Nitoproof 600PF
Product Price: Rs 9,678 / KgGet Best Price
Minimum Order Quantity: 5 Kg
Product Brochure
Product Details:
| Usage/Application | Nitoproof 600PF is used to provide continuous, seamless, water and vapour proof membrane for concret |
| Packaging Size | 20kg |
| Type | Can |
| Color | Block |
| Material | Fosroc |
| Category | Waterproofing Coating |
| Grade Standard | Analytical Grade |
| Features | Non-toxic formulation, One coat application for horizontal and inclined surfaces |
| Specific Gravity | 1.4 |
| Shelf Life | 9 Months |
| Viscosity | 160p |
| Form Of Chemical | Liquid |
Additional Information:
- Delivery Time: with in hours in hyderabad
Get Best QuoteRequest A Callback
DR-Fixit Raincoat Waterporofing Coating 20L
Product Price: Rs 6,200 / LitreGet Best Price
Minimum Order Quantity: 5 Litre
Product Brochure
Product Details:
| Brand | Dr Fixit |
| Packaging Size | 20kg |
| Category | Waterproofing Coating |
| Coverage | 3.0 to 3.5 m2 per litre for 2 coats* |
| Type | Can |
| Color | white |
| Form Of Chemical | Liquid |
| Country of Origin | Made in India |
Get Best QuoteRequest A Callback
MYK Arment Ultra Primer 4.5 kg
Product Price: Rs 2,156 / KgGet Best Price
Product Details:
| Brand | MYK |
| Available Colour | White |
| Packaging Type | Can |
| Paint Base Type | Solvent Based |
| Form Of Paint | Liquid |
Get Best QuoteRequest A Callback
Fosroc Lokfix P
Product Price: Rs 410 / KgGet Best Price
Product Details:
| Usage/Application | High strength corrosion resistant heavy duty anchoring. These anchors include bolts, tendons or dowe |
| Packaging Size | 1 kg |
| Color | grey |
| Material | Fosroc |
| Category | Polyester Resin Anchor Grout |
| Grade Standard | Analytical Grade |
Get Best QuoteRequest A Callback
5 L Dr. Fixit 101 LW Plus Waterproofing Chemicals
Product Price: Rs 577 / BottleGet Best Price
Minimum Order Quantity: 10 Bottle
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 5 L |
| Color | Wine Red |
| Category | Waterproofing Coating |
| Specific Gravity | 1.09 |
| Ph Value | 14 |
| Shelf Life | 12 months |
| Packaging Type | Bucket |
| Form Of Chemical | Liquid |
| Brand | Dr Fixit |
| Appearance | Free flowing liquid |
| Chloride content | 2% |
| Non volatile content | 14,5%1 |
| Water permeability | Passes |
Areas of Application
- Waterproofing of concrete and sand-cement mortars used in
- Basements,
- Roof slabs and screeds
- Water tanks & water retaining structures
- External plastering
- Bathrooms and balconies
- Sumps and drains
- Corrosion resistant - Makes concrete more cohesive, hence protects steel better against corrosion
- Compatibility – Being a liquid, easily dispersible & compatible with concrete/mortar mixes.
- Permeability – It reduces the permeability of water into concrete.
- Strength – The setting time and compressive strength of the concrete remains within the specification limits.
- Shrinkage – Reduces shrinkage crack development in plaster & concrete
- Workability – Improves workability of freshly mixed cement concrete
- Durability – Increases durability by improving waterproofing of concrete.
- Charge cement & aggregates to concrete mixer as per the mix design, mix in dry state for 1–2 minutes.
- Start addition of 75–80% mixing water & mix for 2-3 minutes.
- Dr. Fixit Pidiproof LW+ is added as per the recommended dosage into the remaining mixing / gauging water, then add to concrete mixer & mix for another 2 minutes.
Get Best QuoteRequest A Callback
View More