Call 08047674620 66% Response Rate

Send Email

SBR Latex

Prominent & Leading Wholesaler from Hyderabad, we offer 5 l fosroc fosguard nitobond sbr latex, fosroc nitobond sbr latex bonding agents, myk arment rearm bond sbr latex, carbolink cretebond sbr super latex 5l and myk rearm instaplug.
5 L Fosroc FOSguard Nitobond SBR Latex
  • 5 L Fosroc FOSguard Nitobond SBR Latex
  • 5 L Fosroc FOSguard Nitobond SBR Latex
  • 5 L Fosroc FOSguard Nitobond SBR Latex
  • 5 L Fosroc FOSguard Nitobond SBR Latex

5 L Fosroc FOSguard Nitobond SBR Latex

Product Price: Rs 1,550 / BottleGet Best Price

Minimum Order Quantity: 10 Bottle

Product Brochure

Product Details:
BrandFosroc
Packaging Size5 Litre
CoverageSlurry primer - approximately 4- 5 m2 / litre depending on substrate porosity
Usage/ApplicationConstruction
TypeCan
ColorWhite
Packaging TypeBottle
MaterialFosroc
CategoryCementitious Waterproofing
Grade StandardAnalytical Grade
FeaturesHigh - Provides excellent bond to concrete, adhesion plaster, masonry, stone work, etc
AppearanceWaterproofing
Shelf Life12 months
Pot Life1 hour
Temperature10'C
Thickness0.8 mm. thick of wet film thick
Technical InformationFosroc manufactures a wide range of products pecifi cally designed for the repair and refurbishment
Form Of ChemicalLiquid
Nitobond SBR(Latex) is modified styrene butadiene emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.
Get Best QuoteRequest A Callback
Fosroc Nitobond SBR Latex Bonding Agents
  • Fosroc Nitobond SBR Latex Bonding Agents
  • Fosroc Nitobond SBR Latex Bonding Agents
  • Fosroc Nitobond SBR Latex Bonding Agents
  • Fosroc Nitobond SBR Latex Bonding Agents
  • Fosroc Nitobond SBR Latex Bonding Agents
  • Fosroc Nitobond SBR Latex Bonding Agents
  • Fosroc Nitobond SBR Latex Bonding Agents

Fosroc Nitobond SBR Latex Bonding Agents

Product Price: Rs 4,900 / 20kgGet Best Price

Minimum Order Quantity: 10 20kg

Product Brochure

Product Details:
Pack Typecan
FormLiquid
BrandFosroc
Nitobond SBR LatexFosroc
Grade StandardChemical
Surface of Applicationcementisues
Chemical ResistanceAcids, Water
Shelf Life12 months
Form Of ChemicalLiquid
Packaging TypeBucket
Usage/ApplicationConstruction
Nitobond SBR(Latex) is modified styrene butadiene emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.For modifying and improving bonding of floor toppings, renderings and mortars; repair of worn, damaged and spalled concrete, repair of large cracks; polymer modified floor screeds; waterproof plasters for masonary and slurries PIOLA a Virgin

Additional Information:

  • Packaging Details: can
Get Best QuoteRequest A Callback
MYK Arment ReArm Bond SBR Latex
  • MYK Arment ReArm Bond SBR Latex
  • MYK Arment ReArm Bond SBR Latex
  • MYK Arment ReArm Bond SBR Latex
  • MYK Arment ReArm Bond SBR Latex

MYK Arment ReArm Bond SBR Latex

Product Price: Rs 1,350 / 5kgGet Best Price

Minimum Order Quantity: 10 5kg

Product Brochure

Product Details:
BrandMYK Arment
Usage/ApplicationConstruction
Packaging Size5 Kg
Purity100%
Packaging TypeCan
Grade StandardAnalytical Grade
Shelf Life24 months
Storage ConditionStore in cool and dry place
Form Of ChemicalLiquid
Benefits of ReArm Bond SBR : 
  • Single component, gauged as required.
  • Simple to use
  • Provides excellent bond to concrete, adhesion plaster, masonry, stone work, etc.
  • Gives weather resistant mortar with improved durability impermeability to chlorides and other harmful agents.
  • Provides waterproof screeds, plasters.
  • Improved tensile and flexural properties strength allows thin applications.
  • Compatible with all common hydraulic cements.
  •  Economical to use

Uses :
  • Concrete repair and adhesive Mortar, screed Repair of worn damaged and spalled concrete
  • Repair of large cracks
  • Polymer modified Floor screeds
  • Rendering smooth, good finish, water tight external plaster.
  • Thin layer patching mortars
  • Tile fixing mortars, Masonry Mortars

Application Methodology :

Step no 1: Surface Preparation

The base must be clean and free from loose particles. Unsound areas should be removed until sound concrete is located. Any cracks, pot holes etc, should be properly sealed and cured. The surface to be treated should be free from all coatings, dust and unsound concrete toppings. The unsound parts should be chipped off to arrive at sound surface. Smooth substrates must be mechanically roughened/ abradede.g. by scrabbling, needle gun or grit blasting to provide an adequate key. Corroded reinforcing steel should be exposed around its full circumference and cleaned to remove all loose scale and corrosion deposits. It is always preferably to clean the steel to a bright condition, by use of emery cloth, grit or sand blasting, use of ReArm Rust Remover/ReArm Rust Converter is recommended.

Step no 2: Priming

Reinforcing steel must be primed with ReArm Coat ZPimmediately after cleaning with water. The concretesubstrate should be thoroughly dampened with water andany excess water should be removed. Surface to be primedby thoroughly scrubbing in a slurry coat of 1 volume ReArmBond SBR 1.5 to 2 volumes fresh cement. In order to obtain a smooth consistency, the cement shouldbe blended slowly into the liquids. Stir frequently during useto offset settlement. Avoid ‘poddling’ of the slurry coat. The Topping must beapplied on to the wet slurry. If the slurry dries out it must beremoved and the clean substrate be primed.

Guideline for Application:

Prepare surfaces thoroughly. Toe-in at edges wherever possible to avoid feather edging. All surfaces including edges must be primed. All applications should be wet on wet; the primer must not be allowed to dry. The level of added water in the mix designs may need to be adjusted to achieve the required consistency. In general water content should be kept to the minimum necessary. For consistent performance the use of clean, dry river sand is recommended. Where wet sand is used, reduce the added water level as appropriate. In order to prevent rapid drying, mortars should be covered with wet hunch bag uncured mortar from frost. Minimum application temperature is 100C. For permanently immersed conditions consult Local MYK Arment representative
Get Best QuoteRequest A Callback
Carbolink CreteBond SBR Super Latex 5L
  • Carbolink CreteBond SBR Super Latex 5L
  • Carbolink CreteBond SBR Super Latex 5L
  • Carbolink CreteBond SBR Super Latex 5L

Carbolink CreteBond SBR Super Latex 5L

Product Price: Rs 1,500 / LitreGet Best Price

Minimum Order Quantity: 5 Litre

Product Brochure

Product Details:
BrandCarbolink India
Packaging Size5kg
CategoryWaterproofing Coating
ColorWhite Crystal
Packaging Type5KG
Form Of ChemicalLiquid
Country of OriginMade in India
Crete Bond (ECO) is SBR, multipurpose, concentrated, liquid polymer additive which when used with sand/cement, greatly improves the bond strength and flexibility. Being water resistant, Crete Bond (ECO) mixed with cement can be used as a water proofing sealer. It can also be used as an admix for renders/screeds importing high bond strength and flexibility. Crete Bond (ECO) can be applied to damp surfaces (not wet) and can be rendered or painted over.
Get Best QuoteRequest A Callback
MYK ReArm InstaPlug
  • MYK ReArm InstaPlug
  • MYK ReArm InstaPlug
  • MYK ReArm InstaPlug
  • MYK ReArm InstaPlug

MYK ReArm InstaPlug

Product Price: Rs 860 / BagGet Best Price

Minimum Order Quantity: 5 Bag

Product Brochure

Product Details:
Packaging Size12 Kg
BrandMYK
FeaturesInstant arrest of the leakage area
Weight15 Kg
Shelf Life12 months
Packaging TypeBag
Best Before12 Months
Usage/ApplicationSubsequent sealing of surface leakage, water leaks and damp areas in cellars, manholes, tunnels, etc
Product Description
ReArm Insta Plug is chloride free quick setting cement with immediate start of hardening after addition of water.
Uses 
Subsequent sealing of surface leakage, water leaks and damp areas in cellars, manholes, tunnels, etc.
Against water and pressure water from the backside or front side
Features and Benefits
Instant arrest of the leakage area
Surface Preparation
The surface has to be loadable and clean. Paints, brittle plaster, screed etc., have to be removed up to the solid ground (concrete, masonry). Dry areas have to be wetted. For interior sealing light weight blocks have to be pretreated with a loadable cement plaster. Sealing of aerated concrete blocks or elements is not possible 
Instructions for use Sealing of leakage Leaking parts in sealed surfaces may be closed by pressing Insta plug in dry form or mixed with water into the leakage. Insta plug is to be pressed into the leak

Additional Information:

  • Delivery Time: with in hours in hyderabad
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© H2O Bond Waterproofing Engineers. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.